Epson SureColor S Serie Guía De Alineación página 8

| Adjusting the Take-in Reel
8
Load the roll core with the alignment tool onto the roll holder:
9.
Place the core on the left roll holder and press it in until part
•
Move the right roll holder over to hold the roll core in place, then turn the roll holder screw on
•
the right to lock it into place.
If you are installing the optional heavy roll media system, rotate the handle until part
•
gray part) is hidden as shown below:
Slide the alignment tool to the right side of the roll core and feed it into the printer.
10.
is hidden.
A
(the light
A