Adjusting The Take-Up Reel - Epson SureColor S Serie Guía De Alineación

Adjusting the Take-up Reel

Once you have adjusted the take-in reel unit, you need to perform a similar procedure on the take-up reel
unit. Two people are required for parallel adjustment, one in front of the printer and one in back.
Loosen the roll holder fixing screws and move the left roll holder all the way to the left. Align the
1.
inside edge of the right roll holder with the outside edge of the after heater, then tighten the right roll
holder fixing screw.
Adjusting the Take-up Reel |
13