Making Co Ee Using Pre-Ground Co Ee; Adjusting The Co Ee Grinder; Tips For A Hotter Co Ee - DeLonghi DINAMICA plus ECAM37095 Manual Del Usuario

After delivering the beverage, the quantity setting is reset to the
value

7.4 Making co ee using pre-ground co ee

Important!
• Never add pre-ground co ee when the machine is o or
it could spread through the inside of the machine and
damage it.
• Never use more than 1 level measure (D2) as it could dam-
age the machine or block the funnel (A4).
• When using pre-ground co ee, only one cup can be made
at a time.
1. Press the button (C6) until "
displayed.
2. Open the pre-ground co ee funnel lid (A2).
3. Make sure the funnel(A4) is not blocked, then add one level
measure of pre-ground co ee ( g. 12).
4. Place a cup under the co ee spouts (A9).
5. Then select your required co ee:
• ESPRESSO
• LONG
• COFFEE
6. Preparation begins. An image of the selected beverage
appears on the display, together with a progress bar which
gradually lls as preparation proceeds.
Once the co ee has been delivered, the machine will be ready
for further use.
Important! Making LONG co ee:
Halfway through preparation, the message "ADD GROUND COF-
FEE" "MAX. ONE MEASURE" is displayed. Add one level measure
of pre-ground co ee and press
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
EXTRA-LARGE SIZE
" (ground) is
12
.

7.5 Adjusting the co ee grinder

The co ee grinder is set by default to prepare co ee correctly
and should not require regulating initially.
However, if after making the rst few co ees you nd that the
co ee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5) ( g. 13).
Please note:
The grinding adjustment dial must only be turned when the
co ee grinder is in operation during the initial phase of co ee
preparation.
These adjustments will only be evident after at least 2 cups of
co ee have been delivered. If this adjustment does not produce
the desired result, turn the dial another click.

7.6 Tips for a hotter co ee

For hotter co ee, proceed as follows:
• perform a rinse cycle by selecting the "Rinsing" function in
the settings menu (section "6.3 Rinse
• warm the cups with hot water using the hot water function
(see section"11. Delivering hot water");
• increase the co ee temperature in the settings menu
" "(C3) (see section "6.9 Co ee temperature ").
8. TRUEBREW OVER ICE™ COFFEE
1. Select "Brew over ice" on the homepage;
2. Select the desired quantity and strength by pressi "+" or
"-": then press
3. Add ice to a large glass about half way full and place the
glass under the brewing unit;
4. Press to start delivery;
11
13
If the co ee is delivered too slowly or not
at all, turn one click clockwisetowards 7..
For fuller bodied creamier co ee, turn
one click anticlockwise (do not turn
more than one click at a time.
");
;