Ryobi CW-1801/165 Manual De Utilización página 19

WARNING:
Do not attempt to use this tool until you have fully read and understood all instructions and safety rules contained in
this manual. Failure to comply with these rules and instructions can result in accidents such as fire, electric shock,
or serious personal injury. Save this user's manual and refer to it frequently for continuing safe operation and to
instruct others who may use this tool.
READ ALL INSTRUCTIONS
• KNOW YOUR POWER TOOL. Read the owner's manual carefully. Learn its applications and limitations as well as the
specific potential hazards related to this tool.
• GUARD AGAINST ELECTRICAL SHOCK by preventing body contact with earthed surfaces. For example: pipes, radiators,
ranges, cookers or refrigerators.
• KEEP WORK AREA CLEAN. Cluttered work areas invite accidents.
• AVOID DANGEROUS ENVIRONMENTS. Do not use the power tool in damp or wet locations or places exposed to rain.
Keep work area well lit.
• KEEP CHILDREN AND VISITORS AWAY. All visitors should wear safety glasses and be kept a safe distance from the
work area. Do not let visitors touch the tool.
• PUT UNUSED TOOLS AWAY. When not in use, tools should be stored in a dry locked-up place, out of children's reach.
• DO NOT FORCE YOUR TOOL. Your tool will be more efficient and safer when used at the rate for which it was intended.
• USE THE RIGHT TOOL. Do not force small tools to do the job of a heavy-duty tool. Do not use your tool for a purpose
not intended. For example, a circular saw should never be used for cutting tree limbs or logs.
• WEAR PROPER CLOTHES. Do not wear loose clothing or jewellery that can get caught in the tool's moving parts and
cause personal injury. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protective
hair covering to contain long hair and keep it from being drawn into air vents.
• ALWAYS WEAR SAFETY GLASSES. Ordinary eyeglasses have only impact-resistant lenses; they are NOT safety glasses.
• PROTECT YOUR LUNGS. Wear a face mask or dust mask if the cutting operation generates dust.
• PROTECT YOUR EARS. Wear ear protectors during extended periods of operation of your tool.
• SECURE YOUR WORKPIECE. Use clamps or a vice to hold down your workpiece. It's safer than using your hand and
it frees both hands to operate the tool.
• KEEP YOUR BALANCE. Keep proper footing and balance at all times. Do not use your tool while standing on a ladder
or any other unstable support.
• MAINTAIN TOOLS IN GOOD WORKING CONDITION. Keep tools sharp at all times, and clean for best and safest
performance. Follow instructions for lubricating and changing accessories.
• REMOVE ADJUSTING KEYS AND SPANNERS. Get into the habit of checking that adjusting keys and spanners have
been removed from the machine before turning it on.
• NEVER USE YOUR TOOL IN AN EXPLOSIVE ENVIRONMENT.
Normal sparking of the motor could ignite flammable liquids, gases, or fumes.
• KEEP HANDLES CLEAN AND FREE FROM OIL AND GREASE. Always use a clean cloth to clean your tool. Never
use brake fluid, petroleum-based products or any strong solvents to clean your tool.
• STAY ALERT. Watch what you are doing and use common sense. Do not operate your tool when you are tired. Do not
rush.
• CHECK THAT NO PART OR ACCESSORY IS DAMAGED. Before using your tool, make sure that any damaged part
(the blade guard for instance) will be able to continue working or fulfilling its function. Check the alignment of moving
parts. Check that no part is broken. Check the mounting and any other aspect that may affect tool operation. A guard
or other part that is damaged should be properly repaired or replaced by a Ryobi Authorised Service Centre unless otherwise
indicated in this instruction manual.
• DO NOT USE THE TOOL IF THE SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by
a Ryobi Authorised Service Centre.
• DRUGS, ALCOHOL, MEDICATION. Do not operate your tool while under the influence of drugs or alcohol, or if you
are taking medication.
• CUTTING INTO ELECTRICAL WIRING IN WALLS AND FLOORS CAN CAUSE THE BLADE AND METAL PARTS
TO BECOME LIVE. Do not touch the metal parts when cutting into walls and floors; grasp only the insulated handle(s)
of the tool. Make sure there are no hidden electrical wires, water pipes, or metal framework in the blade path when cutting
into a wall or floor.
• Inspect for and remove all nails from lumber before cutting.
IMPORTANT SAFETY RULES FOR BATTERY-POWERED TOOLS
• Keep in mind that battery-powered tools are always ready to be used since they do not have to be plugged into an electrical
outlet. Be aware of possible hazards when carrying your battery-operated tool, when making adjustments to it, or when
changing accessories.
• USE ONLY THE CHARGER PROVIDED WITH YOUR BATTERY PACK. Do not replace the original charger with any
other charger. The use of another charger could cause batteries to explode and result in serious personal injury.
19
GB