Care And Cleaning - Klarstein 10031893 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Important Hints on Carpet Cleaning
• Do not replace furniture until the carpet is completely dry!
• Do not run the pump when there is no shampoo in the tank!
• The motor noise changes to a higher pitch when the tank is full or blocked. Stop the
machine immediately and empty the water tank.
• Always use a low foam shampoo or use a de-foaming agent.

CARE AND CLEANING

Storage
1
Remove the shampoo head and use the end of the plastic tube to suck up any
remaining liquid.
2
Run the vacuum cleaner until the tubes and hose are clean and dry.
3
Switch off the unit and unplug the unit from the power supply. Then empty the main
tank and shampoo tank.
4
Remove the foam filter to dry. Refit for further wet suction.
5
For dry vacuuming you must fit a dry paper dust bag.
General Maintenance.
1
Ensure the machine is unplugged from the power supply.
2
Disconnect the hose from the container.
3
Undo the clasps and remove motor head from the container.
4
Clear out any dirt or debris from the container and hose.
5
Clean the foam filter by washing it in a mild soapy solution.
6
Check that the telescopic suction tube operates smoothly, and check the power
cable to make sure it has not received any damage.
EN
23

Publicidad

Tabla de contenido
loading

Tabla de contenido