Barrel Cleaning
After working or when the barrel is full of dust which cause suction decreases considerably, you
should cut off the electricity and clean the dust away from the barrel.
• Unfasten the locking knob, lift up the top cover.
• Take off the fi lter bag, clean the dust away in the dust barrel.
• Install the fi lter bag back and place the top cover.
Filter bag cleaning
The fi lter bag should be washed by clean and warm water when it was covered with dust. If neces-
sary, you can use litmusless scour to wash.
• Take off the fi lter
• Wash
• Dry
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Producer: CHAL-TEC GmbH, Wallstraße 16, 10179 Berlin.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
9
Cleaning and Care
Disposal Considerations
Declaration of Conformity