Timer; Time Lapse - Olymbros T3 Manual De Usuario

3.11 Timer

Select "On" if the camera should only
be active during a certain time period .
In the screen menu that subsequently
appears, you can then set the start and
end time for the active phase:
Press the / buttons to set the hour
for the start of the active phase .
Then switch to the next field using the
button . Press the / buttons to
set the minutes for the start of the ac-
tive phase. Then switch to the next field
using the button .
Press the / buttons to set the hour
for the end of the active phase .
Then switch to the next field using the button . Press the / buttons to set the minutes
for the end of the active phase .
The settings made here apply every day . The camera will not record any images outside of the
active phase .
Confirm your selection with the OK button. Afterwards, press the MENU button to close this
sub-menu.

3.12 Time lapse

With this function the camera auto-
matically takes pictures at adjustable
intervals . This is useful if you want to
observe the blooming of plants or the
like, for example. When you confirm
"On" with the OK button, you can then
set the desired time interval using the
menu that now appears:
11
11