Functions Setting - Olymbros T3 Manual De Usuario

Note
• The device supports SD/SDHC memory cards with a capacity of up to 32 GB.
• To avoid malfunctions, keep the memory card away from moisture and avoid strong vibra-
tion, dust, heat sources and direct sunlight .
• Insert the memory card as indicated by the icon on the slot.
• Never force the memory card into the slot. Never bend or twist the memory card.
• Major fluctuations in temperature or humidity can lead to condensation which could cause
an electrical short-circuit. Keep the memory card in the protective case when not in use.
• Please use a name-brand SD card and format before using in this devise.
After connecting a power supply, move the operating mode selector switch to the "TEST" posi-
tion to make the settings described on the following control panel buttons . Press the MENU
button to enter/exit the main menu and start a menu option through the directional arrow
buttons. Confirm you settings by pressing the OK button, or you will lose your new setting .
1) Press button to switch from photo to video mode to shot video clips .
2) Press button to switch from video to photo mode to take still photos .
3) Press the MENU button to open the settings menu .
NOTE: If you do not open the setting menu in 3 minutes, the camera will enter into sleep
mode, and the screen will be turned off, but it will be turned on if any key is pressed . If you do
not open the setting menu within 10 minutes, the camera will power off automatically .
4) Press key to manually trigger the camera shutter . A photo or video (depending on the
camera setting) will be taken and saved to the SD card .
Also, press to Play / Pause the video .
/
5) Press the
the OK button. If you change settings, you must always confirm your changes with "OK". Use
the MENU button to navigate one menu level backwards .
8

Functions Setting

MENU
buttons to select the desired menu entry which you can then activate with
OK
8