Olymbros T3 Manual De Usuario página 3

3 .17 Default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 .18 Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Activating Live Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Displaying Recordings On Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6 .1 Delete One . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6 .2 Delete All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6 .3 Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6 .4 Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Showing Recordings on an External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Transferring Recordings to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Technical Parameters Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
• Be sure the camera's power is switched off before inserting or removing SD card or batteries.
• It is recommended to use new high-performance alkaline AA batteries or rechargeable bat-
teries, to help prevent acid discharge rotting in the battery depot .
• Make sure that the batteries are inserted correctly, matching what is shown on the battery
compartment . Make sure the polarities are correct .
• In the test mode, the camera will shut down automatically after 10 minutes if no key is
pressed . Please switch from OFF to TEST again if you want to continue .
• Please be sure that no power interrupt occurs during firmware upgrade, otherwise the
upgrade process could be interrupted incorrectly . If any fault occurs after improper upgrading
process and the camera stops function properly, please return the device to the seller for repair .
• When the power switch is ON, please DO NOT REMOVE the SD card or batteries, or discon-
nect the external DC power supply .
• When mounting the camera, avoiding temperature and motion disturbances from directly in
front of device within 10', such as heat sources or foliage to prevent false triggering.
• Battery life will vary with operating temperature and number of images taken over time.
Typically, the camera will be able to capture several thousands images before the batteries die .
Cautions
3
3