Default Settings; Version - Olymbros T3 Manual De Usuario

3.14 Serial NO.
Select On to assign a serial number to each camera you have. You can use the combination
of 4 digits and/or letters to record the location in the photos. This helps multi-camera users
identify the location when reviewing the photos .
3.15 Audio
If you want the camera to record sound when recording videos, select "On" here .
3.16 Format
Formatting the memory card will permanently delete all data on it. Before you use a new
memory card in the camera or a card that has previously been used in another device, you
should first format the memory card. Select "Yes" with the OK button and confirm the follow-
ing prompt with the OK button . The formatting process starts . While the card is being format-
ted, the message "Please wait" appears .
CAUTION: Ensure that the memory card does not still contain any files that you need!

3.17 Default Settings

If you select "Yes" the menu item and then slide the select bar in the following prompt to
"OK" using the / buttons and then press the OK button, all previously made camera set-
tings including any password will be deleted and the factory settings will be restored .

3.18 Version

Here show the version number of camera firmware. We periodically release firmware update
with new feature or performance enhancements . Please contact the seller or authorized
dealer to get the updated firmware if needed.
Update Steps:
• Copy the updated file onto an empty memory card.
• Insert the memory card into the device while the operating mode selector switch is TEST to
the OFF position
• Keep the button pressed while moving the operating mode selector switch to the TEST
position . Keep the button pressed till you see the splash screen,and hear the beep sound .
13
13