Delete All; Slide Show; Protect; Showing Recordings On An External Monitor - Olymbros T3 Manual De Usuario

6.2 Delete All

You can use this function to delete all recordings from the memory card. After you have called
up this function, move the select bar to "Delete" and press OK to delete all recordings .

6.3 Slide show

This function can be used to play back the photos stored on the memory card automatically .
Each photo is shown for about 2 seconds . To stop the slide show and keep the current image
permanently on the screen, press the OK button .

6.4 Protect

This function can be used to protect individual recordings or all saved recordings from
accidental deletion .
If you select a write-protected file, the write protection symbol will appears on the display.

Showing Recordings on an External Monitor

Attach the jack plug of the supplied video cable to the TV out socket of the camera and the
cinch plug to the video input of a TV set or the like. As soon as the jack plug is connected to
the TV-out socket , the built-in screen is deactivated and the image is played back via the
TV-out output . The operating mode selector switch must be set to the TEST position.(TV cable
is not included)

Transferring Recordings to a Computer

Connect the USB plug of the supplied USB cable to the USB port on the camera and the USB
plug to a free USB 2.0 port of a switched-on computer. This will now recognize the device as
"mass storage". When you have confirmed this message of the camera with "OK", the camera
connects to the computer and the content of the SD/SDHC memory card will appear as a new
drive on the computer. Now carry out the required file operations.
16
16