Trouble Shooting - Olymbros T3 Manual De Usuario

Defect
The camera does
not work.
The images are
overexposed.
There are no recordings
on the memory card
after period of planned
wildlife observation.
The camera is making
too many unwanted
recordings.
Note: If you cannot solve the problem using any of the above methods, please contact us
or an authorized dealer. We will solve the issue for you as soon as possible.

Trouble Shooting

Possible cause
No batteries inserted.
The batteries are dead.
The camera is pointing
at reflective objects. Such
as traffic signs can cause
overexposure if they
are located within the
recording range
Direct sunlight may be
shining onto the device,
possibly only at certain
times of the day (pay
attention to the position
of the sun).
You have installed the
camera such that no
wildlife can enter the
detection range of the
motion sensors.
The camera could be be-
ing triggered by branches
moving in the wind.
The sensitivity of the mo-
tion sensors may be set
too high
19
Remedy
Insert 8 x 1.5 V batteries
into the battery slots
Replace the batteries. If
you are unsatisfied with
the service life of the
batteries, you can use the
solar panel(not included).
Change the alignment of
the camera.
Change the installation
location of the camera.
Change the installation
location and/or the align-
ment of the camera.
Reduce the sensitivity of
the motion sensors.
19