Phcbi MDF-DU302VX Manual Del Usuario página 27

BASIC PARAMETERS
3.
On the Key Lock screen, it is possible to enter
each setting for the key lock.
•Key Lock: By holding Key Lock slide key and
sliding it to the right, Key Lock turns to ON.
•Password #1: The number (Max. 6 digits) entered
here is registered the release password for Key
Lock.
•Confirm Password #1:
To prevent erroneous input, enter the same
password as in the Password #1 input box. If a
different password is entered, a dialog box is
displayed. Press OK and enter the correct
password.
•By pressing Apply key, Key Lock turns to ON,
password #1 is saved, and Confirm dialog box is
displayed.
Yes: On the Key Lock screen, it is possible to set
the release password #2.
No: The display returns to the Menu screen.
Select [No] when it is no need to set the password
#2.
Note: Two release passwords of Key Lock are
settable. To release it, you can unlock by entering
one of the passwords.
4.
Set the password #2.
•Password #2: The number (Max. 6 digits) inputted
here are registered the release password of Key
Lock.
Confirm Password #2:
To prevent erroneous input, input the same
password as Password #2 input box. When
inputting different password, Notice dialog box is
displayed. Press OK key and input the correct
password.
•By pressing Apply key, the password #2 is saved
and Information dialog box is displayed.
27