Displaying Operation Log - Phcbi MDF-DU302VX Manual Del Usuario

OPERATION/ALARM LOG
4.
Enter the required value for Log Interval. Press
Apply to save the setting. The display returns to
the Log screen.
Settable range: 2 minutes~30 minutes.
Factory setting: 6 minutes.
Note: Only an even number can be entered. When
an odd number is entered and the OK key is
pressed, it changes the value to an even number
which is 1 less than that the number entered.
Note: It is possible to register 8-digit alphanumeric
characters as the Unique ID [page 38].
Note: Relation between log interval and the estimated amount of data that can be saved
Log interval=2 minutes: Approx. 46 days
Log interval=6 minutes: Approx. 135 days
Log interval=30 minutes: Approx. 664 days
When the amount of data saved exceeds the maximum, the oldest data is deleted and overwritten.
5.
Press Top to return to the Top screen.

Displaying operation log

Operation log data can be displayed graphically on the LCD touch panel.
1.
Press Menu key to access the Menu screen.
2.
Press Log key to access the Log screen.
33