Troubleshooting
Troubleshooting
OPERATION
Oven does not operate.
•
Verify power is on.
•
Verify electrical power to the oven and home circuit
breaker is on.
Oven temperature issue.
•
Contact Wolf Customer Care at 800-222-7820 for
recommendations.
No response from the control panel touch pads.
•
Unit is in Sabbath mode (
panel), refer to page 15.
•
Turn the circuit breaker off for 20 seconds, then turn
back on.
i s displayed on the control
"Probe Shorted" is displayed on the control panel.
•
Touch Off. Verify the probe connector is fully seated
into the receptacle. Reset the oven temperature and
probe temperature.
Error message is displayed during clean cycle.
•
For double ovens, if one oven is in an active clean
cycle, the other oven can not be used.
Oven "pops" or "bangs" during preheat or cool down.
•
Normal with new oven cavity expansion and contrac-
tion.
•
Run a clean cycle. If it persists, contact Wolf Customer
Care at 800-222-7820.
wolfappliance.com | 21