Introduction; Intended Use; Features; Package Contents - Parkside PSBSA 18-Li B2 Traducción Del Manual De Instrucciones Original

Atornilladora taladradora de percusión recargable
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CORDLESS HAMMER DRILL
PSBSA 18-Li B2

Introduction

Congratulations on the purchase of your
new appliance. You have selected a high
quality product. The operating instructions
are part of this product. They contain
important information on safety, usage
and disposal. Before using the product, familiarise
yourself with all operating and safety instructions.
GB
Use the product only as described and for the
MT
areas of application specified. Please also pass
these operating instructions on to any future
owner(s).

Intended use

This appliance is intended for installing and re-
moving screws as well as drilling in wood, metal,
ceramic and plastic and impact drilling in bricks
and masonry. It is not suitable for impact drilling
in natural stone such as granite. The light on this
appliance is intended to illuminate the immediate
work area of the appliance.
Use this product only as described and for the
areas of applications specified. The appliance is
not meant for commercial use. Any other usage
of or modification to the appliance is deemed to
be improper usage and carries the risk of serious
personal injury. The manufacturer accepts no re-
sponsibility for damage(s) resulting from improper
usage.

Features

Speed selector
Rotational direction switch / Lock
ON/OFF switch / Speed control
Bit holder
Battery charge level button
Battery display LED
Battery pack
Release button for battery pack
LED work light
Additional handle
Chuck
38
Torque selection ring
Rapid charger
Red charge control LED
Green charge control LED

Package contents

1 Cordless hammer drill PSBSA 18-Li B2
1 Rapid charger PLG 18 A1
1 Battery pack
1 Additional handle
1 User manual

Technical data

Cordless hammer drill: PSBSA 18-Li B2
Rated voltage:
Drive:
Idle speed:
Hammer frequency:
Max. torque:
Torque stages:
Chuck clamping range: max. 13 mm
Recommended hole
diameters:
Battery: PAP 18 A1
Type:
Rated voltage:
Capacity:
Rapid charger: PLG 18 A1
INPUT:
Rated voltage:
Power consumption:
OUTPUT:
Rated voltage:
Charging power:
Charging time:
Fuse (internal):
Protection class:
18 V
2 speed drive
1st gear: n
0–440 rpm
0
2nd gear: n
0–1650 rpm
0
0–26400 /min
40 Nm
1–20 + 1 drill setting /
+ 1 hammer drill setting
max. 13 mm for steel
max. 30 mm for wood
max. 15 mm for bricks
LITHIUM ION
18 V
1.5 Ah
230–240 V ~ , 50 Hz
40 W
18 V
1.8 A
approx. 60 min
T2A
2 A
II /
PSBSA 18-Li B2

Publicidad

Tabla de contenido
loading

Tabla de contenido