General Power Tool Safety Warnings; Work Area Safety - Parkside PDSSE 550 A1 Traducción Del Manual De Instrucciones Original

Ocultar thumbs Ver también para PDSSE 550 A1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Tightening screws and nuts of maximum permissible
size
Uncertainty
NOTE
The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be
used for comparison of the power tool with
another tool .
The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate .
WARNING!
Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool .
Try to keep the load as low as possible .
Measures to reduce the vibration load are,
e .g . wearing gloves and limiting the working
time . Wherein all states of operation must be
included (e .g . times when the power tool is
switched off and times where the power tool
is switched on but running without load) .
PDSSE 550 A1
a
= 9 .156 m/s
2
h
K = 1 .5 m/s
2
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool .

1 . Work area safety

a) Keep work area clean and well lit. Cluttered
b) Do not operate power tools in explosive
c) Keep children and bystanders away while
General power tool
safety warnings
WARNING!
Read all safety warnings, instructions, illus­
trations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury .
or dark areas invite accidents .
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes .
operating a power tool. Distractions can cause
you to lose control .
GB │ MT
 23

Publicidad

Tabla de contenido
loading

Tabla de contenido