Manual Operation - Kohler K-4026 Guia Del Usuario

Sensor Area
Spray
Wand

Manual Operation

NOTE: When the cleansing wash features are activated from the side control panel, they will default to
the middle temperature, pressure, and wand position settings.
"Rear" - Press the icon to activate rear wash. Press again to stop rear wash.
"Front" - Press the icon to activate front wash. Press again to stop front wash.
"Dryer" - Press the icon to activate the dryer. Press again to stop the dryer.
"Power" - Press the icon to turn the power off.
Remote Control Sensor - Receives the signal from the remote control.
Low Light Sensor - Senses low light levels and turns the nightlight on when the automatic feature
is enabled. To enable or disable the nightlight, refer to the "Enable/Disable Automatic Features"
section.
Flush - Press the actuation button to manually flush the toilet. To flush during a power outage, pour
a 2-gallon bucket of water into the bowl.
1221754-5-C
Dryer
Rear Wash
Front Wash
Side Control Panel
Actuation Switch
Seat Sensor Area
8
Remote Control
Signal Sensor
Low Light Sensor
Power On/Off
Kohler Co.