Teamtex ENO360 Manual De Instrucciones página 23

Installation with Isofix
•
Insert the black insertion aids through the slit in the
e side
cushion between the back rest and seating area
t side
and into the Isofix holders.
•
Ensure that the flat side is pointing downwards.
This is not necessary if the vehicle already has
nd the
firmly installed insertion aids.
•
Press the two lateral Isofix connector buttons in
. Then
order to extend the Isofix connectors to their full
length.
•
Insert the Isofix connectors into the insertion aids
again
and press until you hear them lock.
•
The display on both sides only turns green when
the connections have been established. Press the
child car seat against the back rest until it is stand-
ing securely.
Installation with Top-Tether
•
Remove the Top-Tether from the bag.
•
In order to loosen the Top-Tether, press the grey
adjustment button with one hand and pull the side
of the belt anchor to the required length with your
other hand.
•
In order to affix the Top-Tether, hang the anchor to
the fixation point on the car seat and pull it as tight
as possible. The display does not turn green until
the belt is locked.
23
- 23 -
EN