Alliance Laundry Systems DA0220SRG Instalación página 57

If serial plate voltage is:
380 Volt/50 Hertz/
3 Phase
3W&G
70223701
Tumbler can be converted to the following voltages:
400-415 Volt/50 Hertz/3 Phase Reversing and Nonreversing Models:
3W&G
1. Prior to connecting electric service, locate transformer configuration jumper
in junction box area.
2. Remove the 380 Volt jumper and replace it with the 415 Volt jumper located
in the literature packet from cylinder.
3. For stacked tumblers, repeat steps 1 and 2 for each upper and lower unit.
4. Sign and date conversion sticker located on back of tumbler.
5. Follow the instructions covered in Connecting Electrical Service section.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Electrical Requirements
55