American Standard Elevate AM00837400 Manual Del Propietário página 10

5
INSTALLING BOTTOM GUIDE A
• In this step, you'll need following parts: [11] x1, [13] x1
• In this step, you'll need the following tools: A, F, I, J, K
A
5a. Carefully slide Exterior Door Panel [21] over Bottom Guide A [11] and check level of Exterior
Door Panel.
5b. Remove Bottom Guide A [11] and drill previously marked Tub Deck or Shower base using
a 3.2 mm drill bit.
5c. Place Bottom Guide A [11] back in place, up against the Aluminum Seal [19] and check that drilled holes
line up with screw hole in Bottom Guide.
5d. Using provided ST4x25 Screw [13] apply a small amount of sealant along the entire length of the
screw threads, then screw Bottom Guide A [11] into place using a Phillips Screwdriver by hand.
! CAUTION: Do not use a power screwdriver for this step as it could damage the shower base or tub.
5a
[11]
J
5b
K
3.2mm
F
5c 5d
Screw ST4x25
[13]