Important Safety Instructions - Shark ION ROBOT RV750 Serie Guía Del Proprietario

Ocultar thumbs Ver también para ION ROBOT RV750 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force into outlet or try to modify to fit.
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
GENERAL WARNINGS
1.
Robotic vacuum cleaner consists of a
robotic vacuum and charging dock with
QUICK
power supply. These components contain
electrical connections, electrical wiring,
and moving parts that potentially present
START
risk to the user.
2.
Before each use, carefully inspect all
GUIDE
parts for any damage. If a part is damaged,
discontinue use.
3.
Use only identical replacement parts.
4.
This robotic vacuum cleaner contains no
serviceable parts.
5.
Use only as described in this manual.
DO NOT use the robotic vacuum cleaner
for any purpose other than those
described in this manual.
6.
With the exception of filters, DO NOT
expose any parts of the robotic vacuum
cleaner to water or other liquids.
USE WARNINGS
7.
This appliance can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
a) Children shall not play with the
appliance.
b) Cleaning and user maintenance shall
not be made by children without
supervision.
8.
Always turn off the robotic vacuum
cleaner before inserting or removing the
filter or dust bin.
9.
DO NOT handle plug, charging dock,
charging cable, or robotic vacuum cleaner
with wet hands. Cleaning and user
maintenance shall not be made by children
without supervision.
10. DO NOT use without dust bin and filters
in place. Only use Shark® branded filters.
sharkc le a n.com
11. DO NOT damage the charging cord:
a) DO NOT pull or carry charging dock
by the cord or use the cord as a
handle.
b) DO NOT unplug by pulling on cord.
Grasp the plug, not the cord.
c) DO NOT close a door on the cord,
pull the cord around sharp corners,
or leave the cord near heated
surfaces.
12. DO NOT put any objects into or
accessory openings. DO NOT use with
any opening blocked; keep free of dust,
lint, hair, and anything that may reduce
airflow.
13. DO NOT use if robotic vacuum cleaner
airflow is restricted. If the air paths
become blocked, turn the vacuum cleaner
off and remove all obstructions before
turning on the unit again.
14. Keep nozzle and all vacuum openings
away from hair, face, fingers, uncovered
feet, or loose clothing.
15. DO NOT use if robotic vacuum cleaner
is not working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.
16. DO NOT place vacuum cleaner on
unstable surfaces.
17. DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails,
screws, or coins)
d) Large quantities of dust (drywall
dust, fireplace ash, or embers). DO
NOT use as an attachment to power
tools for
dust collection.
e) Smoking or burning objects (hot
coals, cigarette butts, or matches)
f) Flammable or combustible materials
(lighter fluid, gasoline,
or kerosene)
g) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
18. DO NOT use in the following areas:
a) Wet or damp surfaces
b) Outdoor areas
c) Spaces that are enclosed and may
contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust)
d) In an area with a space heater
e) Near fireplaces with unobstructed
entrances
19. Turn off the robotic vacuum cleaner
before any adjustment, cleaning,
maintenance or troubleshooting.
20. Allow all filters to air-dry completely
before replacing in the robotic vacuum
cleaner to prevent liquid from being
drawn into electric parts.
21. DO NOT modify or attempt to repair the
robotic vacuum cleaner or the battery
yourself, except as indicated in this
manual. DO NOT use the vacuum if it has
been modified or damaged.
22. Robot is not to be operated in an area
where a direct hazard is located.
(Ex: Fireplace)
BATTERY USE
23. The battery is the power source for
the vacuum. Carefully read and follow
all charging instructions.
24. To prevent unintentional starting, ensure
the vacuum is powered off before picking
up or carrying the vacuum. DO NOT carry
the appliance with your finger on the
power switch.
25. Use ONLY the Shark® charging dock
XSKRVDOCK and use only battery
RVBAT850. Use of batteries or battery
chargers other than those indicated
may create a risk of fire.
26. Keep the battery away from all metal
objects such as paper clips, coins, keys,
nails, or screws. Shorting the battery
SAVE THESE INSTRUCTIONS
For additional warnings, go to sharkclean.com/robothelp
terminals together increases the risk of
fire or burns.
27. Under abusive conditions, liquids may
be ejected from the battery. Avoid
contact with this liquid, as it may cause
irritation or burns. If contact occurs, flush
with water. If liquid contacts eyes, seek
medical help.
28. Robotic vacuum cleaner should not be
stored, charged, or used at temperatures
below 50°F (10°C) or above 104°F
(40°C). Ensure the battery and vacuum
have reached room temperature before
charging or use. Exposing the robot
or battery to temperatures outside of
this range may damage the battery and
increase the risk of fire.
29. DO NOT expose the robotic vacuum
cleaner or battery to fire or temperatures
above 265°F (130°C) as it may cause
explosion.
30. Batteries cannot be recharged.
BOTBOUNDARY® STRIPS
31. DO NOT put BotBoundary strips
underneath carpet or rugs.
32. DO NOT place BotBoundary strips on top
of one another.
33. Always use BotBoundary strips around
reflective flooring and surfaces.
34. BotBoundary strips should always be
used near carpeted stairs.
35. DO NOT place BotBoundary strips within
10 feet of the dock.
36. For your robot's cliff sensors to work
properly, all runners, rugs, or carpets must
be eight inches from any stairs (or it must
be continuous and extend over the edge
of the stairs). If a runner, rug or carpet
edge that is less than eight inches from
the stairs cannot be moved, you must use
a BotBoundary
s ha rkc l ea n.co m

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ion robot rv760 serieIon robot rv770 serie

Tabla de contenido