Metrohm 799 GPT Instrucciones Para El Uso página 167

799 GPT Titrino
Baud rates >9600 need a PC which is equipped accordingly (e.g. with 16550
component).
The setting of the values must be initiated with $G immediately after entry of
the values.
3.2.2.109. Config.ComVar.C30
with up to .C39, etc.
Values of the common variables from C30 up to C39. Insert the common
variables directly or describe the determination results directly from the
method, see 3.2.2.7
3.2.2.110. Config.DosPrep.PowerOnPrep
Warning after power on, that the preparation of the buret has to be executed.
3.2.2.111. Config.DosPrep.Report
Report output after preparation of burets.
3.2.2.112. Config.DosPrep.Select
Selection of buret.
3.2.2.113. Config.DosPrep.DX.WarnInterval
Time interval in min for automatic warning that a preparation has to be exe-
cuted.
3.2.2.114. Config.DosPrep.DX(.Dosimat).V
Volume in ml, which will be expelled at the preparation. Start of sequence see
3.2.2.152.
3.2.2.115. Config.DosPrep.DX(.Dosimat).Repeat
Number of cycles for expelling the volume at the preparation. Start of se-
quence see 3.2.2.152.
3.2.2.116. Config.DosPrep.DX(.Dosimat).DosRate
Config.DosPrep.DX(.Dosimat).FillRate
Dosing and filling rate in ml/in for the preparation. Start of sequence see
3.2.2.152.
3.2.2.117. Config.DosPrep.DX.Select
Selection of buret type. Start of sequence see 3.2.2.152.
3.2.2.118. Config.DosPrep.DX.Dosino.Outlet
Place where the liquid of the preparation is expelled. Start of sequence see
3.2.2.152.
3.2 Remote control commands
0... +999 999
internal D0, external D1, external D2
5...9999, OFF
0...3.5...99999.99
0.01...150, max.
0.01...150, max.
Dosimat, Dosino
ON, OFF
ON, OFF
1...2...9
tip, flask
163