Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION: HOT • DO NOT HOLD IN HAND WHILE OPERATING • PLACE INFLATOR ON A
HARD, CLEAN SURFACE.
1. DO NOT use inflator continuously for more than 10 minutes. Allow unit to cool
approximately 25 minutes between uses. Do not leave inflator unattended.
2. ALWAYS ensure air hose connector is secured on the valve stem for proper inflation.
3. ALWAYS use a pressure gauge to check tire pressure. DO NOT overinflate.
4. Keep inflator out of reach of children.
5. For use with 120 volt outlets only.
INFLATE TIRES
1
1. Screw air hose connector onto tire's valve stem.
2. Plug extension power cord into the inflator. Insert opposite end into a 120 volt wall
power outlet.
3. Press on/off button to turn on inflator. Inflate tire to manufacturer's recommended
air pressure.* When proper pressure is reached, press on/off button again to turn off
inflator. Unplug power cord and remove air hose connector.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's side
door jamb.
2
3
Publicidad
Tabla de contenido
