NuWave OxyPure Manual Del Propietário página 13

Power ON/OFF
Plug in your OxyPure into an outlet. Power will be lit in
1.
red and unit will be in standby mode.
Press Power. Unit will turn on and Power will be lit green.
2.
Press AUTO. AUTO will illuminate.
•
Bars next to AIR and ODOR will illuminate, measuring
•
current air quality.
The fan will start.
•
Press Power again to turn unit off.
3.
When you select a different mode other than the
•
default "AUTO" before turning off, the unit will run the
previously selected mode when it is powered back on.
AUTO
When AUTO function is used, your unit will adjust the fan
speed automatically (no time limit).
Press "AUTO". "AUTO" will be lit.
1.
ULTIMATE CLEAN
When in ULTIMATE CLEAN mode, the unit will automatically
adjust to the highest or lowest fan speed based on your air
quality (no time limit).
Press "ULTIMATE CLEAN". ULTIMATE CLEAN will be
1.
lit green.
Press "ULTIMATE CLEAN" to turn off.
2.
SLEEP MODE
When in Sleep Mode the LED lights will be off but the fan will
still be active. Adjust the fan speed to your preference prior
to going into Sleep Mode.
Manually adjust FAN SPEED.
1.
Press and hold "FAN SPEED" for 2 seconds to
2.
activate SLEEP MODE.
Unit will run under the fan speed that was
•
previously selected.
To turn off Sleep Mode, press any button.
3.
Note: ULTIMATE CLEAN and TURBO will work during
Sleep Mode.
nuwavenow.com nuwavenow.com
13 13