Air Quality Indicator - NuWave OxyPure Manual Del Propietário

INSTRUCTIONS
FAN SPEED
You can adjust from 6 different speeds (LOW to HIGH).
Press "FAN SPEED" to adjust.
1.
To go back to the lowest level of fan speed, continue to
2.
press "FAN SPEED" until the first bar is lit.
TIMER
Use the TIMER function to choose the duration of operation.
Press "TIMER". The bar next to ½ hour will be lit.
1.
There are 6 preset times to choose from.
•
Press "TIMER" to increase time.
2.
Choose from ½ hour, 1, 2, 4, 8, or 12 hours.
•
After pressing "TIMER" six times, all bars will be lit.
•
Press "TIMER" once more to turn TIMER off.
TURBO
The TURBO function cleans your air using the highest fan
speed at selected times.
Press "TURBO" to adjust from ½ hour, 1, or 2 hours.
1.
When the selected time has finished, TURBO will shut
•
off automatically.
To go back to the lowest level, continue to press "TURBO"
until bar next to ½ is lit.

AIR QUALITY INDICATOR

The OxyPure will automatically measure and display your
current air quality in the room.
The bars will illuminate around "AIR" and "ODOR",
•
indicating the current air quality. Bars will increase and
decrease, and are color coded, according to air quality.
CLEAN AND REPLACE FILTER INDICATORS
The lights next to CLEAN FILTER 2 and REPLACE
•
FILTER 4 will illuminate, indicating that your filters will
need to be cleaned or replaced.
To reset Indicators, see "Resetting the Filter and Air
•
Quality Indicators" in Cleaning & Maintenance.
14 14
instructions