NuWave OxyPure Manual Del Propietário página 22

TROUBLESHOOT GUIDE
ULTIMATE CLEAN does not come on when pressed.
The unit is not reading the function selected. Turn the unit
ON/OFF by pressing "POWER" twice.
POWER is blinking red.
1. Filters are not properly installed or are loose. Turn
off unit and unplug. Check that filters are properly
installed and not loose. Plug unit in and press POWER
to turn ON.
When the Filter Slot Cover is removed, "Power" will
2.
be backlit solid red. Pressing "Power" will make it
blink. However, as a safety measure, the unit will not
be operational when the Filter Slot Cover is removed.
Ensure that Filter Slot Cover is installed securely.
Odor Sensor is not resetting itself and not clearing all
bars. All bars on the control panel are flashing.
Contact Customer Service at 1-877-689-2838 or email
help@nuwavenow.com.
22 22
troubleshoot guide