Layout And Load Recommendations - Transtherm MAS 1T Manual Del Usuario

important
important
Layout and loading recommendations
Your wine cabinet may be equipped with several types of shelves
Storage shelf
Designed to hold stacked bottles, this shelf has 11 recesses.
To arrange the bottles on a storage rack, continue as follows:
- Be sure the shelf does not touch the back wall.
- Start by arranging the bottles in each recess in the back row, bottom of bottle
against the rear stop and neck securely resting in a cradle.
- Continue with the front row, placing the bottles in the opposite direction.
- Continue arranging by piling the bottles, taking care that no bottle touches the back
wall.
A storage shelf can carry up to 7 rows of 11 traditional Bordeaux bottles (100 Kg)
Never slide out a storage shelf – as the bottles could fall.
Sliding shelf : easy-glide
Designed to store just one row of bottles, this shelf has 12 recesses (holding a
maximum of 12 traditional Bordeaux bottles).
To arrange the bottles on a sliding rack, continue as follows:
- pull the shelves towards you up to the stop
- Start by arranging the bottles in each recess in the back row, bottom of bottle
against the rear stop
- Continue with the front row, placing the bottles in the opposite direction.
- Never place more than one row of bottles on a sliding shelf.
- In the event of mixed layout (storage/slider), arrange the sliding shelfs at
the centre of your cabinet.
Discover a new unique patented Transtherm device
fitted on shelves, which allows you to use your cabi-
net daily without vibration, which is harmful to your
wine!
Affix the pads to the recesses of the first row of bot-
tles.
Never pull out more than one loaded sliding shelf at a time
P6