Transtherm MAS 1T Manual Del Usuario página 35

ecommendation
important
Everyday care of your wine cabinet
Your TRANSTHERM cabinet is a simple tried and tested item of equipment.
The following few operations enable you to obtain optimum operation and an
extended life cycle.
1 - Regularly remove dust (twice a year) from the condenser (black metal grill
fastened to the back of your wine cabinet).
2 - Completely clean the inside of your wine cabinet once a year, taking care to
ensure that you have unplugged and unloaded it (use water and a non caus-
tic cleaning product, and make sure to rinse well).
Hygrometry
You cabinet is equipped with an exclusive TRANSTHERM system enabling
the creation, inside your wine cabinet, of the correct humidity level required to
perfectly seal the corks in your bottles
This system uses the water retrieved from condensation, which is then recycled.
Should the humidity level in your cabinet ever reach critical level (less than
50%), just add one or two glasses of water to the lower tray of your cabinet.
The 1 temperature cabinets
(References MA1XP, MA1XM, ER1XG for Asia and Australia only)
- If the outside humidity is very low, and the door is opened frequently, you
will need to moisten the Pozzolana bricks again
- If the outside humidity is extremely high you will need to remove the little
condensation water bung (located at the bottom, on the left hand side of your
cabinet). Keep this bung and replace it in the event that the outside humidity
should drop.
The long life of your wine cabinet depends on regular monitoring, especially
of anything that may appear abnormal, and informing us of any anomalies
found.
GB
P 15