FINAL INSTALLATION
7.
Install bulbs (N).
IMPORTANT: When you need to replace bulbs,
please allow the bulb(s) and glass shade(s) to cool
down before touching them.
8. Attach pull chain extensions (DD) or custom pull
chain extensions (not included) to corresponding
fan and light pull chains.
Hardware Used
DD
Pull Chain
Extension
OPERATING INSTRUCTIONS
1.
The fan pull chain, located on the switch housing of
motor housing (D), has four positions to control fan
speed. One pull is HIGH, two is MEDIUM, three is
LOW and four turns the fan OFF.
7
8
x 2
1
Switch
Housing
16
N
DD
D