Move To Final Location - Midea MRQ22D7AST Manual De Usuario

Refrigerador de dos puertas de montaje inferior, fuente de lamientación 115 v, frecuencia 60 hz, capacidad 21.6 cu. ft.
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5.
Insert the water line directly into the fitting on the end of the
refrigerator water line. Tighten the compression nut. Do not
overtighten.
6.
Confirm connection is secure by gently pulling on the water line.
7.
Turn on the water supply to refrigerator and check for leaks. Correct
any leaks.
Complete the Installation
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
1.
Plug into a grounded 3 prong outlet.
NOTE: This refrigerator begins operating as soon as it is connected to
the power supply.
2.
Move the refrigerator into its final location, making sure to maintain the
recommended clearance.

MOVE TO FINAL LOCATION

WARNING
Fire or Explosion Hazard
Do not puncture refrigerant tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
Failure to do so can result in death, explosion or fire.
IMPORTANT:
If the refrigerator has been in a horizontal position for any period of
time, wait 24 hours to allow the refrigerant to settle before plugging in
the refrigerator.
When moving the refrigerator, DO NOT tilt it beyond 45° from upright.
NOTE: Tilting the refrigerator more than 45° could damage the
compressor and the sealed system.
Avoid placing excessive stress on the doors or top when moving the
refrigerator.
18

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido