Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
S
PACEMAKER
D
/T
S
AY
IME
The buttons used for setting the clock, DAY/TIME CHECK, HOUR and MIN,
are located in the charge cradle of the Spacemaker® Unit. The clock
flashes at initial setup or after a power outage to indicate that it needs to
be set. Follow the steps below to set the clock.
NOTE: The first incoming call with Caller ID information will set
the hour and minute on the clock if it has NOT been previously
set manually, but will not set the day of the week. Please follow
the steps below to adjust the day manually.
The day/time display has a 7-day a week and 12-hour format with an AM/
PM indicator. All messages recorded by the answering system will be
stamped according to this clock.
A
DJUST THE
1. Press and hold the DAY/TIME CHECK button until you hear the current
day of the week set and it flashes in the display.
2. Press and release the DAY/TIME CHECK button to hear the next day
and adjust the day one by one,
3. Press and hold the DAY/TIME CHECK button to advance to the desired
day, release the button to set.
4. If no key is pressed for 2 seconds, the newly set clock will be
announced.
A
DJUST THE
1. Press and hold the HOUR button until you hear the current hour set
and it flashes in the display.
2. Press and release the HOUR button to hear the next hour and adjust
the hour one by one,
3. Press and hold the HOUR button to advance to the desired hour,
release the button to set.
4. If no key is pressed for 2 seconds, the newly set clock will be
announced.
A
DJUST THE
1. Press and hold the MIN button until you hear the current minute set
and it flashes in the display.
16
® U
S
NIT
ETUP
D
W
AY OF THE
H
OUR
M
INUTE
ETUP
EEK
Publicidad
Capítulos
Tabla de contenido
