Steren TEL-220 Manual De Instrucciones página 8

Ocultar thumbs Ver también para TEL-220:

Tabla de contenido

Idiomas disponibles

FORWARD CALL FROM DIALED NUMBERS

1.- Press Out (5). On screen appears last dialed number and the

conversation time.

2.- Press Out (5) until you visualize the number that you want to

forward call.

3.- Press Back (17) and automatically redial.

PAUSE

We recommend you press Pause (15) when enter a long

distance area code or when you dial an extension number. This

function enters a 3,6 seconds delay.

SETTING VIP NUMBER

Your phone set allow you to store up to 38 VIP numbers, and

they have a different ring tone.

1.- Use Up / Down buttons to locate the number that you want to

store as VIP number.

2.- Once you have found the desired number, press Pause / VIP

(15) button. The selected number will be stored as VIP number.

3.- Press Pause / VIP (15) once again to switch the VIP number

into Ordinary number.

When you receive a VIP incoming call, the ﬁ rst ring tone will

be the same as set by you, after that the ring tone will be

different, indicating to you that the incoming call is from a

VIP number.

The number set as VIP can not be deleted by pressing Del

key. To delete a VIP number, you must to convert it to

Ordinary number and then press Del button.

When a number is set as VIP number, a lock icon appears on

LCD screen beside of the phone number.

LOCK

If you want to block the outgoing calls, use the mechanical lock

located on the back of the phone set. You can still receive incom-

ing calls.

1.- Use the key (included) to turn the lock (20), to the green

point. You cannot dial any telephone number that begins with

digit "0" (long distance calls). LOC appears on LCD screen.

ENGLISH-8

Tabla de Contenido

Tabla de contenido