Quick Start - ECOVACS DEEBOT T10 TURBO Manual De Instrucciones

Quick Start

Before using DEEBOT, please remove all protective films or protective
strips on DEEBOT and Clean Station.
Install the Side Brush
Make sure the color of Side Brush is consistent with that of mounting slot.
ECOVACS HOME App
To enjoy all available features, it is recommended to control your DEEBOT via
the ECOVACS HOME app.
Before you start, make sure that:
• Your mobile phone is connected to a Wi-Fi network.
• The 2.4GHz or 2.4/5 GHz band wireless signal is enabled on your router.
• The Wi-Fi indicator light on DEEBOT is slowly flashing.
Wi-Fi Indicator Light
Slowly flashing
Rapidly flashing
10
EN
Disconnected to Wi-Fi or
waiting for Wi-Fi connection
Connecting to Wi-Fi
Solid Connected to Wi-Fi
Wi-Fi Connection
Before Wi-Fi setup, make sure DEEBOT, mobile phone, and Wi-Fi network
meet the following requirements.
DEEBOT and Mobile Phone Requirements
• DEEBOT is fully charged and the power switch of DEEBOT is turned on.
• Wi-Fi status light slowly flashes.
• Turn off mobile phone's cellular data (you can turn it back on after setup).
Wi-Fi Network Requirements
• You are using a 2.4GHz or 2.4/5 GHz mixed network.
• Your router supports 802.11b/g/n and IPv4 protocol.
Click
• Do not use a VPN (Virtual Private Network) or Proxy Server.
• Do not use a hidden network.
• WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
• WEP EAP (Enterprise Authentication Protocol) is not supported.
• Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North
America (refer to local regulatory agency).
• If you are using a network extender/repeater, the network name (SSID) and
password are the same as your primary network.
After Wi-Fi connection, DEEBOT will enter into Networked Standby mode if it
has no signal input within 10 minutes.
Please be aware that the realization of intelligent functions such as remote
startup, voice interaction, 2D/3D map display and control settings, and
personalized cleaning (depending on different products) requires users to
download and use ECOVACS HOME App, which is constantly updated. You
need to agree to our Privacy Policy and User Agreement before we can process
some of your basic and necessary information and enable you to operate the
product through ECOVACS HOME App. If you do not agree with our Privacy
Policy and User Agreement, some of the aforementioned intelligent functions
cannot be realized through ECOVACS HOME App, but you can still use the
basic functions of this product for manual operation.