Pivoting The Head Of The Lamp; Turning The Lamp Head - Hilti SL 2-A12 Manual Del Usuario

5.4 Pivoting the head of the lamp

1. Pull out the retractable hook.
Note
When you suspend the lamp using the retractable hook, check the
load-bearing capacity of the point from which the lamp is suspended.
2. Pivot the head of the lamp upwards.

5.5 Turning the lamp head

CAUTION
Risk of damage to the eyes (the retina). Looking directly into the lamp
presents a risk of damage to the eyes (the retina).
▶ Do not direct the lamp at yourself or at anyone else.
▶ Do not, under any circumstances, look into the lamp.
▶ Turn the lamp head to the desired position.
Note
The lamp head can be turned in either direction along the axis. Do
not attempt to force the lamp head past the end stops.
5.6 Switching on
1. Turn the lamp head to the desired position. → page 6
2. Select a mode by pressing the 3-mode switch.
6 Care and maintenance
6.1 Care and maintenance of cordless tools
WARNING
Risk of electric shock! Attempting care and maintenance with the
battery fitted in the tool can lead to severe injury and burns.
▶ Always remove the battery before carrying out care and maintenance
tasks!
Care and maintenance of the tool
• Carefully remove any dirt that may be adhering to parts.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these may attack the plastic parts.
Care of the lithium­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these may attack the plastic parts.
6 English
Printed: 21.04.2017 | Doc-Nr: PUB / 5346559 / 000 / 00