Braun Silk-epil Xelle 5375 Manual Del Usuario página 7

2 Rub your skin to lift short hairs.
For optimum performance hold the
appliance at a right angle (90°) against
your skin. Guide it in a slow, continuous
movement without pressure against the
hair growth, in the direction of the
switch.
As hair can grow in different directions,
it may also be helpful to guide the
appliance in different directions to
achieve optimum results.
The massaging rollers
be kept in contact with the skin,
allowing the pulsating movements to
stimulate and relax the skin for a gentler
epilation.
If you are used to epilation and look
for a faster way to efficiently remove
hair, attach the EfficiencyPro clip
It allows maximum skin contact and
ensures an optimum usage position.
3 Leg epilation (epilation head
or ):
1a 1b
Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.
4 Underarm and bikini line epilation
(narrow epilation head
attachment):
For this specific application, the narrow
epilation head has been developed.
Thanks to its specific design adapted
to the contours of these areas, it
provides a gentle and thorough
epilation.
Please be aware that especially at the
beginning these areas are particularly
sensitive. With repeated usage the
pain sensation will diminish. For more
comfort, ensure that the hair is at the
optimum length of 2–5 mm.
Before epilating, thoroughly clean the
respective area to remove residue (like
deodorant). Then carefully dab dry with
8
A
should always
a
.
with
2
without
8
a towel. When epilating the underarm,
keep your arm raised up so that the skin
is stretched and guide the appliance in
different directions.
As skin may be more sensitive directly
after epilation, avoid using irritating
substances such as deodorants with
alcohol.
Cleaning the epilation heads
5 After epilating, unplug the appliance
and clean the epilation head. First
remove the clip used (
clean it with the brush.
6 To clean the tweezer element, use the
cleaning brush dipped into alcohol.
Clean the tweezers with the brush from
the rear side of the epilator head while
turning the barrel manually.
7 Remove the epilation head by pressing
the release buttons
right and pull it off. Give the top of the
housing a quick clean with the brush.
Place the epilation head and your
preferred clip (
housing.
Subject to change without notice.
This product conforms to the
European Directives EMC 89/336/
EEC and Low Voltage 73/23/EEC.
Please do not dispose of the
product in the household waste at
the end of its useful life. Disposal
can take place at a Braun Service
Centre or at appropriate collection
points provided in your country.
A a
or ) and
on the left and
3
A a
or ) back on the