Kohler K-8506 Guia De Instalacion página 4

Finished
Wall
2. Install the 3-Way Bodyspray
Apply a bead of plumbers putty or other sealant to the back of
the escutcheon according to the manufacturer's instructions.
Slide the escutcheon over the pipe nipple and against the finished
wall.
Compress the tapered end of the bellows over the bodyspray ball
joint, and loosely thread together.
With the bellows compressed, thread the bodyspray to the pipe
nipple.
Use a clean strap wrench or an adjustable wrench to carefully
tighten the bodyspray.
Remove any excess putty.
Check for proper operation.
1016117-2-C
Pipe Nipple
Escutcheon
Bellows
Ball Joint
Bodyspray
4 Kohler Co.