Cleaning And Maintenance - Beurer MG 185 Instrucciones De Uso

Aparato de masaje muscular
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
5.2 Selecting/changing the attachment
To change an attachment, proceed as follows:
1. Pull the existing attachment horizontally off the Deep Tissue Massager
2. Slide your desired attachment firmly into the Deep Tissue Massager until you feel it click se-
curely into place
5.3 Switching the device on/selecting the vibration level
Note
The Deep Tissue Massager comes with an automatic switch-off function. This means that the
Deep Tissue Massager automatically switches off after a period of use of 10 minutes.
1. Slide the ON/OFF switch on the bottom of the handle to the "ON" position. The battery state
indicator lights up.
2. To start the Deep Tissue Massager, briefly touch the ON/OFF button. "L1" appears in the left
display field and the massage starts at the first intensity level."
3. To switch between the 9 intensity levels, briefly touch the ON/OFF button.
Intensity level 1: 1200 rpm / 20Hz
Intensity level 2: 1400 rpm / 23.3Hz
Intensity level 3: 1600 rpm / 26.6Hz
Intensity level 4: 1800 rpm / 30Hz
Intensity level 5: 2000 rpm / 33.3Hz
Intensity level 6: 2200 rpm / 36.6Hz
Intensity level 7: 2400 rpm / 40Hz
Intensity level 8: 2600 rpm / 43.3Hz
Intensity level 9: 3000 rpm / 50Hz
4. To switch to one of the three massage programmes, briefly touch the programme button
after switching on the device. To switch between the 3 massage programmes, briefly touch
the programme button.
5. You can switch off the Deep Tissue Massager directly both during and after the treatment
by pressing and holding the ON/OFF button for approx. 2 seconds. The massage will stop.
6. Once the treatment is complete, slide the ON/OFF switch on the bottom of the handle to the
"OFF" position.

6. CLEANING AND MAINTENANCE

Cleaning
WARNING
• Switch off the device each time before cleaning.
• Clean the device with a slightly damp cloth only.
• Clean the device using only the methods specified. Under no circumstances may liquid enter
the device.
• Do not use the device again until it is completely dry.
• Do not clean the device in the dishwasher.
• Do not use any abrasive cleaning products or hard brushes.
.
C
19
.
B

Publicidad

Tabla de contenido
loading

Tabla de contenido