Control panel
Button
Function
ON | OFF
Press the ON/OFF button to turn on the device. The unit starts in AIR &
MASSAGE MODE with a low intensity level.
MODE
Press the MODE button once to activate the MASSAGE MODE.
Press the button a second time to switch to AIR MODE.
INTENSITY
By pressing the INTENSITY button on the remote control one of the 2
intensity levels can be selected.
HEAT
You can activate the foot sole heat therapy by pressing the HEAT button on
the device or on the remote control.
This function is not available in AIR MODE.
POWER
By pressing the POWER button on the remote control, the massage will be
stopped at any time.
AIR
By pressing the AIR button on the device one of the 2 intensity levels can
be selected.
The automatic massage lasts 15 minutes. The massage device automatically switches off after
this period of time in order to prevent overheating. Unplug the power cable from the socket
after every use.
16
A I R
LED Display
AIR & MASSAGE
If this function is activated, the LEDs illuminate „yellow" on the device.
MODE
SOLEROLLER-
If this function is activated, the LEDs illuminate „green" on the device.
MASSAGE MODUS
AIR-MODE
If this function is activated, the LEDs illuminate „red" on the device.
Specials
AIR COMPRESSION
Rising and receding airbags have a pumping motion which produces natural muscle re-
flexes. This is particularly beneficial in the calf and foot area.
HEATING
A deep penetrating and heat-radiating effect in which one can perfectly relax. This function
is particularly beneficial for muscle tension due to the deep reaching effect.
REFLEXOLOGY
Reflexology regenerates foot muscles and has a harmonizing effect on almost all organs
inside your body.
SOLE ROLLER
The foot massage stimulates the nerve endings and certain organs of the body, which also
relaxes the muscles.
HEEL MASSAGE
For a particularly beneficial foot massage, the heel area of the FootInn II is equipped with
special acupressure heel airbags and heel rollers.
17