Remote control
LED display
1
For displaying massage mode,
time settings and other information.
On/Off switch
2
Switches the massage chair on/off
Air compressor On/Off switch for
3
the calf air compression massage
function. There are two levels of air
compression intensity.
Timer button
4
Sets the duration of the massage.
Massage area button
5
Selects one of the five massage
areas, namely specific point, local,
upper body, lower body and full
body.
Down key for massage area
6
Moves the massage area down-
wards.
Automatic setting Change massage
7
function for automatic programme
sequence (see page 33 of this
manual for details).
Spacing button Adjust the spacing
8
of the massage heads in three
steps (wide, medium and narrow).
Weightless button Determines the weightless
9
angle of the massage chair with three selection modes
≈(press once for the first level, twice for the second and three
times for the third level).
Raised seat position The backrest and calf support are simultaneously adjusted to the most
10
comfortable seated massage position depending on the desired massage angle.
Voice control button Voice activation with the voice recognition control function.
11
Heat function button Switches the calf heating function on or off.
12
Up key for the massage area Moves the massage area upwards.
13
Massage type button See page 34 of this manual for details.
14
Speed button Sets the massage speed.
15
Lowered seat position The backrest and calf support are adjusted simultaneously to the most
16
comfortable reclining massage position depending on the desired massage angle.
30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16