Package Contents; Description (Fig. A); Electrical Safety - DeWalt DW937 Manual De Instrucciones

• Only use D WALT saw blades conforming to the
E
specifications contained in these operating
instructions.
• Only sharp saw blades in perfect working
condition should be used; cracked or bent saw
blades should be discarded and replaced at once.

Package contents

The package contains:
1 Cordless reciprocating cutsaw
1 Saw blade
1 Battery pack
1 Charger
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your D WALT cordless reciprocating saw has been
E
designed for professional sawing of wood, metal
and tubes. The compact design permits cutting
extremely close to the edge of difficult areas.
1 Variable speed switch
2 Lock-off button
3 Front handle
4 Main grip
5 Saw shoe
6 Housing
7 Battery pack
Charger
Your D WALT 1 hour charger DE9107 accepts
E
D WALT battery packs ranging from 9.6 to 14.4 V.
E
Your D WALT 1 hour charger DE9108 accepts
E
D WALT battery packs ranging from 9.6 to 18 V.
E
7 Battery pack
8 Release buttons
9 Charger
10 Charging indicator (red)

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
power corresponds to the voltage on the rating
plate.
19
Also make sure that the voltage of your charger
corresponds to that of your mains.
Your D WALT charger is double
E
insulated in accordance with EN 50144.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
Never use a light socket.
Never connect the live (L) or neutral (N)
wires to the earth pin marked E or
Using an extension cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension
cable suitable for the power input of your charger
(see technical data). The minimum conductor size is
0.5 mm 2 ; the maximum length is 30 m.
E N G L I S H
.
en - 4