Graco Aire 4 XT Manual Del Propietário página 57

4. To create a secure installation, while
pushing down on the base, pull the free
end of the lap belt or the shoulder portion
of the lap/shoulder belt to tighten
5. Check that belt does not move by pulling
and pushing hard on base with hands near the
vehicle belt path. If belt loosens
or lengthens, repeat procedure.
6. Push the infant restraint down into the base and
make sure that you hear a "click" . Pull up on
the infant restraint to be sure it
is latched securely into the base.
If the infant restraint does not securely latch
into the base, the infant restraint provides NO
protection for your child. DO NOT use the infant
restraint/base if the infant restraint does not
securely latch into the base.
7. Test infant restraint for secure
installation as described in infant
restraint "Final Safety Check" page 42.
.

29

