Quick Installation - Tripp-Lite OmniVS AG-0005 Serie Manual De Operación

Quick Installation

1
Connect the UPS to
an electrical outlet.
Make sure the outlet does not share a
circuit with a heavy electrical load such
as an air conditioner or refrigerator.
2
Plug a computer,
monitor and/or other
equipment into the UPS
system.
The UPS is designed to support only
computer equipment. Connecting high
power draw equipment such as
household appliances or laser printers
to outlets providing UPS battery backup
will overload the UPS. Select outlets
(clearly labeled on the rear panel)
provide surge-only (not battery backup)
protection designed for laser printers
and other heavy-draw devices.
"UPS/Surge" receptacles are used to
provide connected equipment with AC
line power during normal operation and
battery power during blackouts and
brownouts. They also protect
equipment against damaging surges
and line noise. Connect the computer
and monitor to the "UPS/Surge"
receptacles.
3
Select UPS Operating
Mode.
Press the ON/STANDBY button to
toggle the UPS between the
ON (" " LED lit) and the
STANDBY ("
17-08-172-933103.indb 3
" LED not lit) modes.
1
2
3
3
8/21/2017 9:43:35 AM