Bostitch BOS20SUITEBLK Manual De Instrucciones página 3

Congratulations on your purchase of this premium quality electric stapler.
With proper use and care, this stapler will serve you for many years.
IMPORTANT
Please read these instructions completely and carefully before operating your new
electric stapler. Keep this instruction sheet for future reference.
FEATURES
• Built in staple storage right where you need it, stores up to 4 sticks of staples
• Built in staple remover
• Adjustable paper guide with 45 degree stapling
• Extra wide paper lead in
SPECIFICATIONS
• Operating Voltage: 120V AC, 60Hz
• Operating Current: 2.5 amps
• Staple Size: Standard 1/4"
• Magazine Capacity: 220 staples
• Stapling Capacity: 2 to 20 sheets of 20 lb. bond paper
• Recommended Stapling Rate: Up to 20 staples per minute
IMPORTANT NOTE BEFORE BEGINNING
This unit is to be used on 120V AC outlets only. Always unplug your stapler before
cleaning or attempting to clear a staple jam. The stapling capacity has been designed to
staple a maximum of 20 sheets of standard 20 lb. bond paper.
GENERAL SAFETY PRECAUTIONS FOR ELECTRIC STAPLER
• Do not operate electric stapler with a damaged cord or plug, after stapler
malfunctions, or has been damaged in any manner.
• Unplug unit from outlet before cleaning or removing stapler jam. Grasp plug, not the
cord, when disconnecting stapler from outlet.
• Do not allow electrical components to get wet.
• Keep fingers, hair, jewelry and foreign objects, etc. away from staple opening.
• Do not disassemble the stapler. Should the stapler require servicing at any time,
refer to warranty.
• This stapler is not intended for heavy commercial use. Do not use the stapler for
stapling hard materials like cardboard or heavy plastic
• Do not operate stapler without inserting paper and refrain from double stapling
(stapling over a staple)
• CAUTION: The power supply cord is used as the main disconnect device, ensure that
the socket-outlet is located/installed near the equipment and is easily accessible