Bostitch B8 Guia De Inicio Rapido

H-2028
BOSTITCH B8
®
DESKTOP ELECTRIC
STAPLER
CLEARING A JAM
1. Remove AC plug from the outlet before removing
jammed staples.
2. Press the magazine release button.
• If the magazine ejects, remove jammed staples
from the magazine and proceed to step 6.
• If the magazine does not eject, proceed to step 3.
3. Use a pen or similar object to disengage the staple
driver from the magazine. (See Figure 1)
Figure 1
• If the staple driver disengages, press the
magazine release button and remove the
jammed staples. Proceed to step 6.
• If the staple driver does not disengage, proceed
to step 4.
4. Turn the unit upside down with the suction cup feet
facing the ceiling and the cord facing away from
you. (See Figure 2)
PAGE 1 OF 6
1-800-295-5510
uline.com
TROUBLESHOOTING
5. Locate the vertical metal slot inside the stapler
Pour le français, consulter les pages 5-6.
opening, where paper sheet is inserted. Verify if
staples are present. (See Figure 2a)
Figure 2
• If staples are present,
insert a flat head screw
driver or stiff paperclip into
the opening. Position screw
driver at the bottom of the
slot and push the staples
upward to remove.
(See Figure 3)
• If staples are not present,
insert a flat head screw
driver or stiff paperclip into
the opening. Position screw driver at the top of
the slot and push downward to release the stuck
staple driver. You will hear a loud sound as the
staple driver moves back into the proper position.
(See Figure 3)
Para Español, vea páginas 3-4.
Figure 2a
Figure 3
0321 TH-2028