koban KMDS01 Instrucciones Operativas página 68

Audible continuity
Audible threshold: Less than100
Overload protection: 500V AC/DC rms.
OPERATION
WARNING : Risk of electrocution. High-voltage circuits,
both AC and DC, are very dangerous and should be measured
with great care.
ALWAYS turn the function switch to the OFF position
1.
when the meter is not in use. This meter has Auto OFF that
automatically shuts the meter OFF if 15 minutes elapse between
uses.
If "OL" appears in the display during a measurement, the
2.
value exceeds the range you have selected. Change to a higher
range.
NOTE : On some low AC and DC voltage ranges, with the test
leads not connected to a device , the display may show a random,
changing reading. This is normal and is caused by the high-input
sensitivity. The reading will stabilize and give a proper
measurement when connected to a circuit.
www.grupotemper.com
AUTORANGING MULTIMETER
Test current: <0.3mA

KMDS01
9