Di4 Jet Pressing Smartcare Manual Del Usario página 22

steam will be released through the soleplate, removing limescale and/or deposits that may be
inside.
•The container must only be used to perform the descaling process. It must not be used as a
stand for the iron while ironing.
6. Press the steam release button (12) for 2 seconds. The descaling process will start automatically.
During this process, short beeps will be heard.
7. After approximately 3 minutes, the iron will stop releasing steam. A long beep will be heard, indicating
that descaling process has finished. The appliance will switch off automatically.
8. To clean the soleplate (11), immediately rub off any residue by running the hot iron over a wet cotton
cloth. Wipe the housing of the iron with a cloth.
Warning: The container gets hot during the descaling process.
9. Let it cool down and then empty the container.
2. Cleaning the appliance
Regularly clean your appliance for properly maintenance.
Attention! Burn risk!
If the appliance is only slightly soiled, wipe it with a damp cotton cloth only, and then dry it.
To keep the soleplate smooth, you should avoid contact with hard metal objects. Never use a scouring
pad, or chemicals to clean the soleplate.
3.Storing the appliance.
1. Unplug the appliance and let it cool down. Empty the water tank (7).
2. Place the iron on the steam station, standing on the pad (10).
3. Store the mains cable in the storage compartment (13) and the supply hose in the storage fixing (6).
Do not wrap the cords too tight.
22