English - geberit AQUACLEAN MERA Instructions De Montage

Testing the lid lifting function of
the remote control
The lid lifter can be activated with the <Shower>
button.
▶
Press the <Shower> button to activate the
lid lifter.
Result
✓ The WC lid opens fully. Pressing the <Shower>
button again closes the WC lid.
54043197686759179-1 © 09-2018
966.729.00.0 (07)
Adjusting basic settings
to customer's wishes
Comfort model
The basic settings of the device are set
from the rear of the remote control.
The following steps are shown in shortened
form. See user manual for an overview of
the complete menu.
Prerequisite
– Function test of the device was performed
successfully.
– Function test of the remote control was
performed successfully.
1
Launch [Basic settings] main menu via the
<left>/<right> arrow key.
Basic settings
Select submenus with the <up> and <down>
arrow keys. Configure settings with the
<left> and <right> arrow keys.
2
Call up the [Select language] menu. Set the
menu language.
Select language

English

3
Call up the [Water hardness] menu. Set the
hardness value in accordance with the local
water hardness.
Water hardness
hard
Range
soft
medium
hard
Set to [hard] if you do not know the local
water hardness.
EN
49