Putting The Device Into Operation - geberit AQUACLEAN MERA Instructions De Montage

4
Call up the [System flush] menu. Configure
switch-on behaviour.
System flush
off on
✓ [on] = The system flush starts as soon as
a user is detected on the WC.
✓ [off] = The system flush starts before the
shower procedure as soon as the
<Shower> button is pushed. The flush
time before the shower procedure is
approx. 15 seconds.
5
Call up the [Basic settings] menu.
Basic settings
Result
✓ The settings are saved.
✓ The device is installed correctly.
54043197686759179-1 © 09-2018
966.729.00.0 (07)
Commissioning

Putting the device into operation

Prerequisite
– Function test using the lateral control panel was
performed successfully.
– Function test of the remote control was
performed successfully.
– The device is installed correctly.
1
Remove the spray shield.
2
Clean the device.
3
Close the WC seat and WC lid.
Result
✓ The device is ready for operation and can be
handed over to the customer.
EN
51