Beep Summary - Sigma ONYX FIT Manual Del Usuario

7.3 BEEP SUMMARY

The different volume settings are:
Button tones:
Button tones give the user acoustic feedback each time a button
is pressed.
Zone alarm:
The zone alarm is an acoustic signal when the user changes from
one training zone to the next.
Training tones:
Training tones always sound when the watch switches from one
training phase (e.g. warm-up) to another (e.g. workout).
1 x long:
k When entering Zone 1
k always when a recovery pulse is saved
(0 sec, 30 sec, 60 sec, ...)
2 x long:
k When entering Zone 2
k if there is only one zone, when entering this zone
3 x long:
k When entering Zone 3
3 x short:
k If you are below Zone 1
k above zone 3
k if there is only one zone, when you are below the zone
5 x short:
k When there is only one zone, when you are above the zone
65